This kitchen fitter does exactly that.I always ask what sort of flooring is going down and always leave the plinth off until the floor has been tiled or vinyl layed or even laminate floored Once I finished screwing on my kitchen plinth fittings, I peeled off the blue protective film an attached to the base unit legs. Fitting Kitchen Plinth Corners The height of your kitchen plinth will obviously depend on how tall or short the legs have been adjusted. My fitter has scribed the top of the plinths with the inevitable result that there's a gap between the bottom of the plinth and the floor in places, so the info here is really useful. So, on every leg, I measured the height and also jogged down how far apart they were from each other.

After my main kitchen cupboard plinth was in place, it gave me a new starting point for my last bit. This was so I could continue joining kitchen plinths together.I also made sure the raw cut was facing the first plinth and that the far-right had a finished look. Otherwise, it would be visible on the end of my corner plinth.

Because if you do,you are doing it wrong.There is now way to can do this unless the floor is perfectly flat and horizontal,otherwise the vertical ends would not be vertical, and the return pieces would reflect this. For this longer cut, I took it outside for some ventilation as it is an MDF wooden plinth. If you're not aware, MDF dust is very dangerous for the lungs. Don't worry about being a couple of mms out as each clip slides a bit, giving you some leeway. Positioning the Clips On the Kitchen Plinth

Plinth sealing strip is used on the bottom edge of kitchen plinths and other panels to help stop water ingress from spills and moisture from cleaning processes. If you are in the market to buy, you can even buy kitchen plinth lights with sensor features these days. Do You Need a Kitchen Plinth Vent?