This method involves using the hairdryer to heat up the glue underneath the mouse feet. Once the glue has been heated long enough, use a spudger (a flat plastic tool with a sharp end) or a knife to scrape underneath the feet to peel them off — be careful if using a knife!

The XM1r is a refresh of the acclaimed Endgame Gear XM1 Gaming Mouse. With the inclusion of the new PixArt PAW3370 optical sensor and Kailh GM 8.0 switches, topped with two new transparent shell editions, the XM1r has been designed with precision and style in mind. The XM1r’s responsiveness is significantly improved by the implementation of the PixArt PAW3370 sensor with a resolution of up to 19000 CPI, 1mm of Lift-Off-Distance and up to 400 IPS. Every effort has been made to squeeze the last ounce of performance from this sensor. Once you have removed all the old skates from the base your mouse, give the surface a clean by using rubbing alcohol (Isopropyl). This will remove any excess adhesive that may still be present. Leave the mouse to dry, and then it's time to apply the new ones.Finally, once the grip tape is properly applied, use a sharp hobby knife or scissors to trim any excess grip tape from around the edges of your mouse. Trimming the edges gives your mouse a clean and finished look. Once you have your replacement mouse skates in hand, it's now time to remove your old ones from the base of the mouse. There are a few different methods to do this, but we’ll cover the main, most reliable method (in our opinion):

We've converted this review to Test Bench 1.5. This update adds a new Main Button test group, which provides button actuation data and switch information. We've also made minor changes to how we calculate the Office usage score. For more details, you can see our full changelog here. In accordance with the statutory provisions, PGW is solely liable for compensation of injuries to life, limb or health, for damages according to applicable product liability regulations and for damages caused by wilful intent or gross negligence on the part of PGW, whereby PGW shall not be liable for lost profits, indirect damages, consequential damages and claims third-party-claims. This End User License Agreement (hereinafter “Agreement”) is an agreement between you (hereinafter “User”) and the Pro Gamersware GmbH (hereinafter „PGW“), a German limited liability company with its main offices located at Gaußstraße 1, 10589 Berlin, Germany. Unless explicitly otherwise agreed, these terms and conditions apply exclusively.The limitation period for claims made by Users, who are not private end users, shall be one year from the start of the statutory limitation period. A contributory negligence on the part of the User will be of consideration when assessing PGW’s liability. Contributory negligence on the part of the User according to this Agreement shall be assumed in the case of non-compliance with the User’s rights and obligations. We've added a link to the newly-reviewed LAMZU Atlantis in the wireless versatility section of this review. You can use the spudger or knife on its own without using the hairdryer, especially if you're unsure of how long to heat the feet up by. This may leave traces of glue on the bottom of the mouse however, which will need to be removed before attaching the new mouse feet. This Software may be subject to import and export control regulations of different countries. The User will comply with the applicable import and export control regulations of the Federal Republic of Germany, the European Union and the United States of America as well as all other relevant regulations.