Once cured, the high-performance active ingredient will provide a dampness barrier, making that mortar course into a new damp-proof course. Before any damp proof injection treatment begins, both internal and external walls are prepared and any plaster that has been affected with rising damp or hygroscopic salts will need to be removed along with decaying skirting boards and any wall fixtures. The cost of damp course injection is very affordable, especially when compared to more obtrusive methods.

On external faces of walls, drill holes can be re-pointed using a matched mortar or can be plugged with DPC Injection Plugs (Available in a variety of colours).This means that it is fully compatible with both Dryzone Renovation Plasters and Dryzone Express Replastering.

Your technical advice has been prompt and most beneficial in making sure that the correct product is used on our installation. We strongly recommend that you contact us directly for further help and guidance on all aspects of our products and services. Dryzone has been independently tested and approved by the BBA as well as multiple equivalent organisations internationally, making it the most rigorously tested damp proofing cream on the market.This 8Litre DPC injection pack contains the products needed to provide a chemical DPC to stop rising damp in walls. There is also a range of Dryzone System Tools to help application go smoothly, including the Dryzone Drillbit and Dryzone Hole Clearing Tool. The removal and replacement of internal salt contaminated plaster is an important part of an effective damp-proof course. A unique formulation to enable superior penetration of the active ingredient within the building substrate. Full instructions for installing Dryzone Damp-Proofing Cream can be found in the Dryzone datasheet on the ‘downloads’ tab of this page.

We had then got no hydro DPC cream installed above the the tanking slurry to prevent water rising past the tanking. Lead times are shown on the product and trolley pages and are always advertised in working days (Monday to Friday). Using a large caulking gun to inject the cream into the wall the cream will provide an effective barrier against rising damp in walls. Precise Dosing: DampSolve DPC Cream provides accurate dosing, so you can be sure of the exact amount you need to cure your damp problems. The injection cream has a special consistency that allows the active ingredients to optimally penetrate the wall.

It is therefore essential to follow specific re-plastering guidelines drawn up for dealing with the particular challenges posed by damp / salt-affected surfaces. This process introduces ground salts into your walls, causing plaster contamination and decay of skirting boards.

Rising damp is when groundwater rises up load-bearing walls in capillary action through the fine capillaries and pores of brick and mortar in a wick effect in walls that have no original DPC installed during the construction of a property. Once in the substrate, One Shot Injection Cream migrates into the masonry pores and rapidly reverts to a liquid phase.Due to the fact that it is a high strength cream, Dryzone delivers over 5 times more active ingredient to a wall, over a wider area, than other low strength competitors, making it longer lasting and more effective. The advanced, ready-to-use, chemical damp proofing formula migrates through the mortar beds and once cured forms an effective moisture barrier (DPC) within the wall. It is the highest strength damp proofing cream in the world with an active ingredient (silane) level of 80%.