Reset the monitor to Factory Defaults. See the User Guide of your monitor for more information about how to reset the monitor to factory defaults. If the integrated display resolution is FHD (1920 x 1080 @ 60 Hz), two external displays with QHD (2560 x 1440) @ 60 Hz could be supported. To learn more about setting up and troubleshooting issues with multiple monitor setups, see these Dell knowledge base articles: How to Set up Multiple Monitors or How to Troubleshoot Multiple Monitor Issues

If only one monitor is shown, while the other is not, go to Windows Display Properties, under Multiple Displays, select the output for the second monitor. When enabled, this setting allows PCIe devices that are connected through a Thunderbolt adapter (that is PCIe devices behind the Thunderbolt adapter) to perform the PCIe device’s UEFI Option ROMs (if present) during preboot. All other products will be delivered via the fastest available method (excluding bank holidays and weekends) and generally within 3-5 days, depending on customer location. NOTE: For some computers, the following settings are all found under the section USB-Configuration.IDC Whitepaper: “Optimizing Performance with Frequent Server Replacements for Enterprises” commissioned by Dell Technologies and Intel, March 2021. Results are based on interviews with 18 IT practitioners and decision makers at midsize and large enterprises and a web survey of 707 IT practitioners and decision makers at midsize and larger enterprises using Dell Technologies server solutions across 7 industries. See full whitepaper: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/servers/server-infrastructure-resiliency-enterprise-whitepaper.pdf Secure Connect - Allow one-time saved key devices at a minimum - the CM requests connection approval from the host SW and autoapproval is only given if the host challenge to the device is acceptable. For functional limitations with notebooks from other manufactures in comparison to Dell Commercial notebooks, please see this support article. NOTES: Linux operating system is unable to physically turn off integrated display. The external display numbers are one less than the display numbers listed in the above tables.

NOTE: If higher resolution monitors are used, the Graphics driver makes a judgment based on monitor specifications and display configurations. Some resolutions may not be supported and is removed from the Intel Graphics Media Control Panel. HBR2 is DP 1.2 (5.4 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 4.3 Gbps per laneDisplayPort over USB-C enables the delivery of full DisplayPort AV performance. (Driving monitor resolutions of 4 K and beyond.)It is SuperSpeed USB 3.1data and up to 100 W of power with the convenience of reversible plug orientation and cable direction. DisplayPort is the first AV protocol to be carried over USB-C.

on Dell internal analysis using publicly available specs in August 2023 comparing maximum effective capacity for PowerStore 1200 and FlashArray //X20. Assumes average 4:1 data reduction for PowerStore, 5:1 for Pure Storage. Actual results vary. Ultimate connectivity: USB-C connectivity makes it easier than ever to deliver power, data, audio and video in one convenient cable, no matter what system you use. Plus, with support for dual FHD or a single QuadHD monitor, you can connect to everything you need.Thunderbolt 3 supports a 16 Gbit/s data rate using PCI express. Thunderbolt 4 supports twice that with a 32 Gbit/s data rate. HBR3 (HBR3 x4 lanes + HBR3 x1 - 32.4 Gbps) For Precision 7530/7540/7730/7740 with discrete graphics card When a new device is plugged in, the USB hub driver notifies the Plug and Playmanager that a new device was detected. The plug and play manager queries the hub driver for all the device's hardware IDs and then notifies the Windows operating system that a new device must be installed. In this scenario, the user sees a hardware installation window. Power your day: Dell ExpressCharge allows you to charge up to 80% in one hour , making it the most efficient way to manage the workday. HBR2 is DP 1.2 (5.4 Gbps maximum link rate per lane). With DP overhead, the effective data rate is 4.3 Gbps per lane.