To see the current rate your battery is charging at, open the INPA program>> E90>>ENGINE>>MSD80>> Status(F5)>>PM-IBS>> PM FIELD 2 . As many of you pointed out most of the BMWs can take H6, H7 or H8 the clip in the battery bay is meant for hooking the battery in the right slot. my OEM FLA 90AH battery lasted 7 years and almost 100k miles before i got my first high discharge battery warning (I didn't let it get to the point of failure before changing it).

This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. The CAS and NFRM/FRM modules will now always default back to the new attributes you assigned to the VO! I Dk the difference between AGM and Lead Acid but I replaced mine with an Advanced Auto Parts Autocraft Gold 49, 900 CCH 95 AH.

I used Carly for my cars but i believe that these are the correct procedures to register your battery aslong the specs of the new battery matches the old one. Popular models compatible with this repair include: 2010 BMW 328i, BMW M3 2008, 2013 BMW M3, 2009 BMW 328i and countless others.

The weakest of these is the battery Exide Excell EB800 which capacity is 80 Ah and Cold Cranking Amps is 640 A. Depending on when you replaced it, the BMW battery, Walmart, Bosch and several other brands may have all been the same battery with different packaging. Registering the battery with the car ECU is highly recommended even with the same type / size battery. Also, when the IBS sees that battery voltage is too low for normal vehicle operation it can start shutting down vehicle functions to conserve power while keeping the vehicle operational. This means that the compatible ICOM BP-217Li Battery Replacement capacity will go from 100% down to 0% over a time period regardless.If you can program it into your car then there is no drawback as AGM batteries are overall better then acid batteries. Steps 1-20 are fine, except that I don't have FRM, only NFRM, but I get tripped up on step 6 of the second set of steps. Even though the lowest setting I found in the CAS module was 80ah AGM, Carly provided a 36ah AGM option.