The manufacturer may also give an acceptable equivalent ACEA or API specification, though this might be for 'emergency top-up only'. You can rely on the excellent performance of fully synthetic oils where it matters, from viscosity and lubricity to deposit protection. A product with a BMW Longlife-01 (BMW LL-01) rubber-stamp indicates that it has gained approval by BMW as a legit fully synthetic long-life oil.

Synthetic oils, while more expensive than natural oils, allow for greater mileage between oil changes, offer better performance at lower and higher temperatures, and are designed to help clean your engine and protect it from deposits.

If you haven’t serviced your BMW vehicle for a long time and are looking for a quick engine detox, this might be the right solution for you. If your BMW engine is listed as allowing LL01 FE, then go ahead and use SN GF-5 full synthetic 0w-30 or 5w-30 (any brand, Valvoline, Quaker State, etc.BMW revises its oil formulations every few years based on current engine design, mileage and emissions requirements, fuel type and quality, region, and marketing (service plans).

It is important to match the oil to the engine design of your BMW, but there are other factors such as the local climate and the way you drive. The best thing about this filter is the housing and filter element can be separable— both components are fully replaceable during maintenance.According to some expert mechanics, BMW vehicle owners should change the oil filter every 10,000 miles or 12 months. and 5W-40 oils are compatible with some models of common cars, like the Ford Focus, Ford Ka, Honda Civic and VW Golf. Once you switch your motor oil with Motul 007250 8100 X-cess, you will notice an instant improvement in fuel economy. It is also a must for fans of German turbo or compressor engines, especially as they take the multi-valve engine designs of modern German cars to the extreme. e. titanium, improves engine performance by reducing friction, by lubricating it properly and preventing metals from coming into contact with each other, resulting in a lower amount of dirt deposits, increasing the engine’s responsiveness in different climatic conditions and maximizing mileage and durability.