To cleaning the heating chamber, use the cleaning brush to gently remove any excess particles inside and around the chamber. This was my first dry herb vape and was my daily driver for just over 7 months until it just stopped charging. Due to the way it’s designed you cannot open it up to fix or replace batteries. If you try it will break due to its cheap design. Herbva 5G has three temperate settings, it will be showed by the indicate LED light: Green light= 390°F(Low) ;Blue light= 405°F(mid) ;White light= 420°F(High)

To properly vaporize, you will need to heat your herbs enough so that the plant releases its chemicals, but not so much that the herbs will burn. Remember the numbers 350 and 450. Between 350 degrees Fahrenheit and 450 degrees Fahrenheit are ideal for vaporizing, anything lower than the 350 mark will not produce any vapor. Anything higher than the 450 mark will ignite your herb. Different herbs have different vaporization temperatures, so you need to make sure you can regulate the temperature to avoid burning some herbs or not vaporizing others at all. There are 2 other preset temperature settings available. You can toggle between these 3 settings by pressing the button once. The Herbva 5G has three temperature settings - this is indicated by the LED light above the power button. The ceramic baking chamber is narrow and deep. In contrast to the HerbvaX, it is a little narrower as you can see in the below picture. Using the Herbva 5G is as simple as it gets. First of all, we recommend you to ‘burn it off’ by turning it on (with 5 presses on the power button) and let it run a session with an empty chamber. This helps to burn off any manufacturing residues that may be left on surfaces.The Airistech Herbva 5G has performed rather well during our testings and produced quite good quality vapor. We believe it represents a great value for money and makes vaporization available for almost everyone at this price point. A full charge is recommended before first use and it will take around 2-3 hours from empty to full charge.

Fill the chamber full with dry herb( always make sure to finely grind your materials before vaporizing), but don't over- pact When you first turn on your Herbva 5G, it will heat up to the first preset temperature setting of 390 Fahrenheit (approximately 200 Celsius). This temperature level is indicated with a green color LED light. when turn on the device, your temperature will be set as 390°F(the low temperature), a green flashing LED light will appear indicating that your device start the We have reviewed the Herbva Nokiva and Herbva X models before here at VapeFuse. They both provide great value for money and make vaporization affordable.

You may also like…

The new Herbva 5G powered by a 1000 mAh battery and has a five-pin ceramic heating chamber. Additionally, it comes with a glass mouthpiece if you fancy vaping through glass. We have tested out the Herbva 5G and posted a detailed review here.