Dilute 1 – 2 capfuls of LTP Floorshine per litre of warm water. Mop the surfaces with the solution. Do not rinse. Allow surfaces to dry. Do not walk over the floor while LTP Floorshine is drying. After use rinse mop well with water. Do not apply to polished surfaces. After several years, if tiled and Laminate surfaces suffer from a build up or become difficult to clean, remove the accumulation using LTP Grimex. Wooden floors should be gently stripped using LTP Solvex to remove accumulation. Scratches are out of control: If you have pets with sharp claws, forget to put clean doormats inside and outside entrance areas, or frequently wear shoes with hard heels in the house, you're going to have scratches. Scratches and scuffs equal dull floors. Practice a little prevention to keep them to a minimum. Waxy buildup: If the floors were not sealed with a polyurethane finish and rely on a carnauba paste wax to create the shine, the wax can build up and look dull. Even if you use wax appropriately only once or twice a year, eventually, it will build up and turn dull in low-traffic areas. Paste wax can be stripped off using mineral spirits or another commercial wax stripper.

LTP Floorshine renovates dull-looking surfaces, and is recommended for cleaning and maintaining surfaces that have been sealed with LTP Ironwax Gloss, LTP Ironwax Satin& LTP Glaze Protector.

Top equipment to help your team get more done

LTP Floorshine is a ‘clean and shine’ renovating cleaner for interior use on tiled, wood and laminate surfaces. Cleans and protects in one operation.

If table cleaner is processed further, total physical output is 1,200,000 ounces. TSR and TP combined account for 50% of the total physical output and are each allocated 25% of the CDG cost.Speaking of rough terrain, let’s talk about hiking boots. These boots will usually be similar to work boots in profile, and for the most part they’re interchangeable. Leather is still a good material for this kind of footwear, though you’ll want a type that’s been treated with extra waterproofing. Since your feet will be working hard in these boots over a long period of time, you want something that’s protective yet still breathable. The fit is crucial, so make sure to break your boots in fully before taking them out on the trail. Using too much product: Even if you are doing everything correctly, using too much cleaning product or water will leave floors looking worse. More is not always better.

You're just redistributing the dirt: Using a dirty mop or forgetting to sweep, dust mop, or vacuum the floor before cleaning will simply redistribute the dirt. Imagine all that grit, dust, and dirt getting trapped in the cleaning solution and simply staying on the surface of the floor. Leaving the job half done: After damp mopping or waxing a hardwood floor, the job should be finished with a good buffing to prevent streaking. Simply use a dry microfiber mop to buff the finish and ensure a shiny floor. NB. Use LTP Floorshine in place of your normal detergent. Do not mix with any other cleaning agent. Not suitable for highly polished tiled surfaces – for correct maintenance of this type of surface use LTP Porcelain Floor Tile Cleaner or LTP Stonewash.There are more types of boots than we can possibly cover here, but let’s break them down into four main styles: Work, outdoor, casual or dressy. It’s a common myth that guys don’t have as many options as girls when it comes to clothing. In most areas, that might be true, but when it comes to boots? It’s a wide open field. When you think of a men’s boot, you might be talking about a short and stylish Chelsea, a tall, non-nonsense engineer’s boot or anything in between. Find the right one, and you’ve got go-to footwear you can count on for years — but you have to first narrow down where you plan to wear them. The company decided not to process the table cleaner into TSR and TP based on the following analysis.