For my next set of tests, I compared the U6-Pro to some similar models from Aruba Instant On and TP-Link Omada. These are all indoor models, which are good for broad coverage over a large area. I also sorted these by price, with cheaper models on the left. We have a full Unifi system at home, which i know is a bit of an overkill, however i love my technology and like the fact the Unifi system is so customisable and configurable. Initially i had a Wifi 6 lite in the centre of the house, but we had lots of issue of intermittent drop outs and slow speed. I have a full fibre connection at 900mbs, the lite could only deliver around 300mbps. Also the wifi signal was poor, it was okish in the house but the garden was non existent. The U6-Pro is the newest of the three, and it is also a big step up from the U6-Lite. The U6-Pro also offers more transmit power, higher-gain antennas, more spatial streams, and more overall performance than the U6-Lite. The U6-LR and U6-Pro are both IP54-rated, meaning they are partially dust and splash resistant. They can be used in a protected outdoor area, like under a porch roof, but you wouldn’t want to install them in an unprotected outdoor area.

The difference between the U6-Lite and U6-LR is large enough that it could be the deciding factor between needing one or two APs to cover a given area. In some situations one U6-LR is better, in others two U6-Lites may be better. It’s hard to make general conclusions. There wouldn’t be much difference in performance or price, so that decision probably comes down to where you have Ethernet cabling more than anything. Note for International ReadersThe U6-Pro-US access point has a 52% 5ghz wifi speed increase over the previous Unifi Pro based on the iPerf speed tests. Details about the extent of our regulation by the Financial Conduct Authority are available from us on request.

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. Heute angekommen war echt erstaunt die Qualität lässt sich sogar fühlen auch wenn das für einen Access Point wohl irrelevant ist :-) The AC-Mesh-Pro is an AC1750 Wi-Fi 5 AP, offering more performance than the non-pro model. It doesn’t have removable antennas, but instead comes with high-gain (8 dBi) antennas built-in. The AC-Mesh-Pro is big enough that it could act as a lunch tray. It is harder to hide, but the additional antenna gain provide impressive range and performance. The AC-Mesh-Pro can operated on standard 802.3af (15W) PoE, or with Ubiquiti’s 48V passive PoE. The U6-Pro switches from MediaTek to a Qualcomm chipset. Generally speaking, Qualcomm’s solutions are better than an equivalent MediaTek chipset. I’m glossing over a lot of details there, but the underlying differences are enough that Ubiquiti classifies the U6-Pro as a 6th generation device, while the U6-Lite and U6-LR are both 5th generation.

Enhanced Security and Network Isolation

These tests were conducted with 5ghz Wi-Fi channel width set to VHT80 on the the UAP access points and HE80 on the U6 so that speed shouldn't be constrained by wifi channel width. Final Thoughts The new Wi-Fi 6 access point feels a lot more substantial between the two. The new Wi-Fi 6 version increased in weight by about 10 ounces over the previous Pro to ~20oz despite the same outer dimensions. For comparisons of all UniFi AP models, see my UniFi Comparison Charts and UniFi Access Point Buyers Guide.

The U6-Mesh is a Wi-Fi 6 update to the FlexHD, and is my default recommendation for outdoor UniFi networks. I explained my current home network in Zen and the Art of Home Networking. In that post I walked through my home network and why I chose the APs and locations that I did. I’ve used the U6-Lite, U6-LR, U6-Pro, U6-Mesh, and several other models and vendors. The differences aren’t always what you would expect from the spec sheet.The U6-Mesh is my default recommendation for outdoor UniFi wireless networks. The AC-Mesh and AC-Mesh-Pro are still workhorses, and their superior antenna options make them better options in some situations. I’d still lean towards the U6-Mesh due to the higher performance with Wi-Fi 6 devices, but that’s just me. I don’t think there’s a big rush to upgrade from an AC-Mesh or AC-Mesh-Pro, but for new installs and upgrades the U6-Mesh is the new benchmark. As part of their AC Wave 2 lineup, the FlexHD offered a new enclosure, which resembles a tall, skinny Coke can. The FlexHD can be used on a shelf, mounted on a ceiling, or on a pole. The FlexHD can be used indoors or outdoors, and is generally a very _flexible_ access point. I’ve never had a FlexHD to test, but it should perform similar to a nanoHD, which I have tested. The Ubiquiti U6-Pro UniFi WiFi 6 Access Point is an indoor WiFi 6 AP with 5.3Gbps over the air speed and a 300+ client capacity. The U6-Pro is a dual-band WiFi 6 (802.11ax) access point that represents the next generation of high-performance wireless technology for home and enterprise users. Delivering blazing fast over the air speeds of up to 5.3 Gbps over its 5GHz and 2.4GHz channels, the U6-Pro will maximise the WiFi experience of any residential or office deployment. Plus, with its ability to support over 300 concurrent clients, the U6-Pro ensures reliable wireless coverage across even the most device-dense environments. The U6-Pro also marries power with ease of use through streamlined setup, configuration, and mobile-friendly management via the UniFi Network app. Key Features The AC-Mesh is an AC1200 Wi-Fi 5 AP that is getting old, but it’s still for sale and a valid option for new outdoor installations. The AC-Mesh comes with removable omnidirectional antennas, which can be replaced with any antenna that has RP-SMA connectors. The AC-Mesh can operated on standard 802.3af (15W) PoE, or with Ubiquiti’s 24V passive PoE.

The U6-Lite has an older 2.4 GHz radio, meaning it doesn’t deliver the benefits of Wi-Fi 6 for 2.4 GHz clients. The U6-Lite is an AX1500 class AP, with an 802.11n-era 2.4 GHz radio and a 5 GHz radio that tops out at 80 MHz channel width. The U6-Lite doesn’t support 160 MHz channels, unlike the U6-LR, Pro, and Mesh. They can all operate in DFS channels in the US, though. Lastly, the new Wi-Fi 6 Pro requires PoE+ where the UAP-Pro could use either PoE or PoE+. Real-world Throughput Speed Tests The Ubiquiti U6-Pro UniFi WiFi 6 Access Point is an indoor WiFi 6 AP with 5.3Gbps over the air speed and a 300+ client capacity. The U6-Pro is a dual-band WiFi 6 (802.11ax) access point that represents the next generation of high-performance wireless technology for home and enterprise users. Delivering blazing fast over the air speeds of up to 5.3 Gbps over its 5GHz and 2.4GHz channels, the U6-Pro will maximise the WiFi experience of any residential or office deployment. Plus, with its ability to support over 300 concurrent clients, the U6-Pro ensures reliable wireless coverage across even the most device-dense environments. The U6-Pro also marries power with ease of use through streamlined setup, configuration, and mobile-friendly management via the UniFi Network app. Easy to Deploy and Manage! In summary the pro was definitely worth the upgrade in terms of speed, but if you are looking for a longer reach wifi signal then i would suggest you consider the LR instead.

Guest Portal/Hotspot Support

Indoor, dual-band WiFi 6 access point that can support over 300 clients with its 5.3 Gbps aggregate throughput rate.