When a Phillips is not a Phillips!". Instructables.com. Archived from the original on 2011-08-27 . Retrieved 2011-08-01. Transactions of Technical Conference on Metric Mechanical Fasteners. American National Standards Institute. 1975. p.67. Archived from the original on 2021-04-15 . Retrieved 2020-10-26. Also called BNAE NFL22-070 after its Bureau de normalisation de l'aéronautique et de l'espace standard number. A cross-head screw with a two-step driver design, with the blade diameter stepping up at a distance from the point.

The 12-pointed internal star shape superficially resembles the "double hex" fastener head, but differs subtly in that the points are shaped to an internal angle of 90° (derived from a square), rather than the 120° internal angle of a hexagon. In practice, drivers for the fasteners may be interchangeable, but should be examined carefully for proper fit before application of force. A hex key should not be used where a key of square cross-section is the correct fit. United States Maritime Service Institute. (1949). Engine Room Tools. New York: Mast Magazine Association. p. 25 Combination drives [ edit ] Example of a combination drive system. At center, a Torx T25/slot Dual Drive screw; at left, a 3⁄ 16-inch (4.8mm) flat-blade screwdriver; at right, a T25 screwdriver. The screw will accept either screwdriver.Tri-Wing Screwdriver. "Tri-wing screwdriver: Types". Triwingscrewdrivers.com. Archived from the original on 2012-03-23 . Retrieved 2012-03-12. The Phillips Screw Company". www.phillips-screw.com. Archived from the original on 2014-12-21 . Retrieved 2015-01-16. ISO 8764-1:2004(E) Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver tips" (PDF). Archived (PDF) from the original on 2023-04-30 . Retrieved 2023-05-01. Machinery's Handbook (PDF) (27thed.). Industrial Press, Inc. 2004. p.1596. Archived from the original (PDF) on 8 September 2017 . Retrieved 8 September 2017. About Bristol Wrench Spline Drive Bits". 2016-10-21. Archived from the original on 2016-10-21 . Retrieved 2019-11-23.

The Slotted/Pozidriv is slightly different from the Slotted/Phillips (PH/S), and good use requires special screwdrivers. [ citation needed] ACR Phillips II Plus [ edit ] Most tamper-resistant screw configurations rely on the common unavailability of corresponding drivers to reduce the likelihood of widespread tampering. True tamper-proof - rather than merely resistant - screw drives include the breakaway head and one-way screw drives. New Bolt Drives FCA to Better Seat Assembly". www.assemblymag.com. Archived from the original on 23 August 2019 . Retrieved 23 August 2019. Slot screw drives have a single horizontal indentation (the slot) in the fastener head and is driven by a "common blade" or flat-bladed screwdriver. This form was the first type of screw drive to be developed, and for centuries, it was the simplest and cheapest to make because it can just be sawed or filed. Additionally, it is unique because the slot head is straightforward to manufacture, and because it can be driven by a simple handtool. The slotted screw is commonly found in existing products and installations, along with use in simple carpentry work and in applications where minimal torque is needed. Slot screws are also used in the restoration of antique furniture, vehicles, and equipment.

Recently Viewed by You

a b c d e f g Rybczynski, Witold (2000). One good turn: a natural history of the screwdriver and the screw. New York [u.a.]: Scribner. ISBN 0-684-86729-X. Recessed head fastener and driver combination". Google Patents. 2015-12-11. Archived from the original on 2020-01-26 . Retrieved 2017-10-13.

The triple-square, also known as XZN, is a type of screw drive with 12 equally spaced protrusions, each ending in a 90° internal angle. The name derives from overlaying three equal squares to form such a pattern with 12 right-angled protrusions (a 12-pointed star). In other words, three Robertson squares are superimposed at a successive 30° rotation. The design is similar to that of the double-square—in both cases, the idea being that it resembles a square (Robertson) but can be engaged at more frequent angles by the driver bit. These screws can be driven with standard Robertson bits. Adler, Alexander (1998-05-18). Testing and Understanding Screwdriver Bit Wear (Master's thesis). Virginia Tech. hdl: 10919/36701. A cross or double-slot screw drive has two slots, oriented perpendicular to each other, in the fastener head; a slotted screwdriver is still used to drive just one of the slots. This type is usually found in cheaply-made roofing bolts and the like, where a thread of 5mm (0.20in) or above has a large flattened pan head. The advantage is that they provide some measure of redundancy: should one slot be deformed in service, the second may still be used. a b c "Unterschied zwischen Pozidrive und Superdrive"[Difference between Pozidriv and Supadriv] (in German). Goedkopeschroevenkopen.nl. Archived from the original on February 22, 2014 . Retrieved 2014-03-20. Care should be taken not to confuse the name of this pattern with the casual phrase "spline head" which usually refers to the XZN pattern.The Phillips Screw Company". phillips-screw.com. Archived from the original on 2021-10-08 . Retrieved 2021-10-07. When a Phillips Is Not a Phillips Plus So Much More!". Instructables. Archived from the original on 2021-06-08 . Retrieved 2021-09-23.