Reactive Targets for Nerf, Rubber Band Guns, and others. Watch them fly into the air when hit. Great gift The Nerf N-Strike Elite Rapidstrike is also capable of firing darts at a rate of 3 per second over a distance of 75 feet! With a fully automatic system, the Nerf N-Strike Elite Hyperfire can fire darts at the incredible rate of 5 per second. One downside to the Hyperfire’s extreme blasting system is that it tends to get hung up on old, worn down darts and is likely to jam. It was re-released in 2014 with improved Elite XD internals and a white, blue, grey, and orange color scheme; this re-release was shown off at the 2014 New York Toy Fair.

Learn more about the Nerf N-Strike Elite Hyperfire on Nerf Wiki here! Nerf RapidStrike Nerf N-Strike Elite Rapidstrike CS-18 Arcane Minigun - DIY Cosplay Prop Kit - Magical Arcane Minigun - Magitech Gun- Arcanist Weapon - Arcanist LARP I have the same results with 2 and 3 cell zippys (6.6 and 9.9v) and the behavior is the same (I have a 7.4V batt on the way). Use flush cuts to chop off wire ends and solder blobs around edges of the two FCG switch PCBs. Do not remove the PCBs. Doing so removes support and insulation from the switch legs and makes wiring more difficult and reliability problems more likely.

The RapidStrike released early in the Philippines in May of 2013, due to the release error on the part of the distributor. [ citation needed] Full-size microswitch with roller-lever or simulated roller actuator, 10A rated or higher, to fit FCG and grip internals (optional, but recommended) SEE NEXT: Which Nerf gun is the most accurate? (Hint: not the one that you think it is!) NOW WATCH: Nerf Dart Comparison | Which Darts are Best?! In this guide, we are building a "front-wired" RS. In "front wiring", the battery leads exit the rest of the harness at the flywheel cage area. The only difference is how the flywheel cage's negative connection is handled and where the battery leads go. First of all, there is a lot of talk about motor swaps. The 130 motors that come with the RS aren't too shabby. They play well with battery voltages near 7.2 or 8.4V and deliver quite practical performance. Plus, compared to swaps, they are free.

To make this blaster even more battle ready, the Nerf N-Strike Elite Rapidstrike features not one, but FIVE separate tactical rails! With this many tactical rails you can easily customize your blaster to be your greatest asset in every blaster battle. Worker Mod Metal Side Pull Grip with Bolt Striker Modified Kit for Nerf N-Strike Elite Retaliator Toy K25 Spring for Saturn Blaster - High Powered K 25 Coil Spring Mod For Nerf Rival Edge Blaster Saturn XX-1000 Toy Gun Part The speed of the RapidStrike's flywheels has two stages. The slowest stage occurs when the acceleration trigger is pulled; the second, faster stage occurs while both triggers are pulled. This cures the problem in other flywheel blasters where rapid fire decreases the flywheel speed and reduces range. The change in speeds can be heard when the clip is empty. Alpha Trooper CS-18 • Deploy CS-6 • Longshot CS-6 • LongStrike CS-6 • Raider Rapid Fire CS-35 • Rayven CS-18 • Recon CS-6 • Stampede ECSDo not be concerned to damage the PCB edges, lift the pad, etc. Do not cut or damage the 6 switch terminals - everything else is fair game to be leveled. Learn more about the Nerf N-Strike Elite Rapidstrike on Nerf Wiki here! Similarities and Differences Do NOT cut the wire ANYWHERE yet; leave it attached to the coil/spool. This goes for all rearwards-directed pieces of wire here; you will cut these to length later after connecting to more hardware.