The RRP Proguard Rear Mudguard helps protect from mud, dirt and water - minimising cleaning post ride and maximising intervals between services. RRP ProGuard's versatile design allows for easy fitment on a huge range of bikes. RRP Proguard Rear Mudguard Features

GT85/WD40/Solvents - Only rub these on the surface if you want to remove the gloss and display a matte finish to match your bike. The best mountain bike mudguard currently available on the market is the RRP ProGuard Max Protection Mbr Magazine (Feb 2020) Slots and holes for easy installation with cable ties (included) or Velcro straps (sold separately)DUE TO THE CURRENT HIGH DEMAND, DELIVERY TIME FOR BIKES IS 7-10 DAYS. ALL PARTS AND ACCESSORIES ARE STILL 1-2 DAYS. Like most of the formed guards, the Pro Guard has a three-point fixing via the brace and fork lowers. There are 24 crown holes for zip-ties allowing to accommodate a wide range of brace sizes and shapes (although not reverse arch) and it also gets a fork brace indent to increase tyre clearance. It’s compatible with 26, 27.5 and 29inch forks and RRP claims, tyres up to three inch in diameter. The Pro Guard also features seal protection, which simply means the side of the guard is a little bit wider and lower to stop dirt and crud contaminating the seal area, and ultimately ending up inside the lowers. sizes: Standard offers superb coverage and protection. Max is 70mm longer and offers incredible coverage and levels of protection, especially for high speed racing

I have been using the RRP ProGuard on a few mountain bikes for several months. The performance has been excellent, with a vast improvement in the amount of spray and mud that comes off the front wheel reaching the face and body with the most noticeable area when riding at higher speeds where mud can spray out in front, which you would normally ride into it. This mudguard design is perfectly suited for the rigours of modern mountain biking. It ensures superb all-weather protection for anything from Enduro and Downhill racing, to weekend Trail sessions with friends. And, since it’s made from RapidRacerProducts’s unique polypropylene, it gives a superbly flexible and ultra-durable performance at a low weight. Slide the guard into position WITH THE WHEEL IN PLACE, you may need to squeeze the sides of the guard as you do so to get it through the sear stays The ProGuard is our amazing new range of FRONT and REAR mudguards for disc brake mountain bikes offering unmatched protection from mud and spray, it’s perfect for Trail, Enduro or Downhill racers and essential for the weekend warrior looking for the very best protection. Our design intent was to increase the tyre clearance, improve fit, and reduce the mud clogging issues seen with this type of mudguard. The MINI offers a very compact design for all year round protection, The STANDARD offers superb protection in a shorter more compact design, whereas the longer MAX PROTECTION version (21mm longer at front than the STANDARD and 68mm longer at the rear) offers incredible unmatched levels of protection. Available in 3 sizes Front Mini:

Also consider…

The ProGuard - BOLT ON is our direct mount front mountainbike mudguard designed for big spray and mud protection (DISC BRAKE ONLY) Squeeze the side wings of the mudguard hard and slide under the fork brace from the rear with the wheel and tyre still in place

Both fenders perform great and have mostly been set and forget items. Aside from the occasional extra flex of the Standard, they go unnoticed but you'll make note of the clear vision they provide. Select the correct bolts for your fork (details below) and run these into the threads WITHOUT the mudguard which will 'PRIME' and clean the threads before fitting, this part is important (YOU MAY NEED TO RE-TAP THE THREADS IF DEBRIS / PAINT IS LEFT IN THE THREADS FROM THE MANUFACTURE OF THE FORKS) BOLTS: FOX = M3 (2 bolts) | OHLINS = M4 (3 bolts) | SR SUNTOUR = M6 ( *1 bolt)The ProGuard range of mudguards have a matte textured finish with gloss highlights on the logos and centre strip. The underside features a smooth lightly polished finish for better mud flow. Forks: This direct mount mudguard is designed for the forks listed below ONLY IF THEY HAVE Threaded holes in the rear of the fork brace Fits Fox 32, 34, 36, 38, *40 (2021) 49 The ProGuard BOLT ON will fit most fork models listed below if they have the *THREADED HOLES at the rear of the fork brace (DISK BRAKE ONLY): WHEELS: 26” 27.5” 29” TYRES: up to a 3” tyre BRAKE / OFFSET: MINIMUM 44mm HUB: STD & BOOST FORKS: