Single needle/nozzle for spraying all mediums, inks, dyes, watercolours, acrylics, enamels, laquers and latex http://www.britmodeller.com/forums/index.php?/topic/234976552-iwata-triple-action-handle-issues/?fromsearch=1

Single needle/nozzle for spraying all mediums, inks, dyes, watercolours, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex®, MODELflex® Totally Tattoo® and Totally Tanª colours

Features

The triple action handle was good for ease of cleaning, but it's also good for fine(ish) work, such as pre-shading panel lines by setting the amount of paint required. Swapping from one nozzle set to another takes about 20 seconds and you don't need any tools for this or to strip the brush down to it's component parts.

The main question is how fine do you need to spray and what are the largest areas you are looking to cover and what is your current setup giving you? The Anthem®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem® also provides flawless performance in the most rigorous of production airbrushing environments. It has a 0.2ml nozzle set that paints down to about 1mm for detail, the internal 0.5ml or small 2ml paint cup can be used for this. As well as a 0.4mm nozzle set and 5ml paint cup for larger areas. It also has a preset handle to set the maximum paint flow. The Anthem ®, Model 155, is the most comfortable, reliable, proficient, cost effective, user friendly airbrush ever. The two angle needle tip precisely mates with the Anthem's cone shaped nozzle enabling a single needle/nozzle configuration to spray virtually any desired material, thus eliminating the need for fine, medium, or large needle/nozzle variations. The Anthem's body design provides exacting balance and long term user comfort. The Anthem ® also provides flawless performance in the most rigorous of production airbrushing environments. FEATURESDeveloped to deliver precise performance and fine line detail, the Patriot is an ideal airbrush for custom art, graphic arts and illustrative work. The Patriot airbrush will operate at 30 PSI, as well as lower pressure settings (10-15 PSI) and is ergonomically balanced for hours of comfortable airbrushing. The Anthem also features the patented rear needle release allowing the user to remove the needle without having to remove the handle. Single needle/nozzle for spraying all mediums, inks, dyes, watercolors, acrylics, enamels, lacquers, glazes, latex, Air-Opaqueª, Air-Tex®, MODELflex® Totally Tattoo® and Totally Tanª colors

Fine nozzle set for details down to 1mm, high flow larger nozzle set and larger cup for area work..Not sure which other parts were also changed, normal route would be; 0.3mm needle, nozzle, nozzle cap and needle cap.

Single needle/nozzle for spraying all mediums including inks, dyes, watercolors, properly reduced acrylics, enamels, lacquers, and airbrush-ready colors including Spectra Tex, Air-Opaque, Air-Tex, Model flex, and Totally Tattoo. We have a number of customers in your part of the words, so you may know someone that has one you can have a go with.

Subscribe

On flexibility for the future, you can add a 0.15mm nozzle set for ultrafine work and a 0.6mm nozzle set for very large area work. There is also a micro paint cup that covers the cup thread if you are doing a lot of detail work as well as 15ml, 50ml and side feed 15ml bottle options available.