Once the cables are inserted and the Wii console is powered on, switch your TV to the channel you use to watch movies. Put in a video tape and play the movie. When you see the movie playing, press stop (do not power off the VCR) and proceed to the next step. When I said the legacy lives on, I wasn’t kidding: many of the Switch’s best-selling games are direct ports of Wii U titles. Mario Kart 8, Zelda: Breath of the Wild, Donkey Kong: Tropical Freezeand Bayonetta 2 have all been ported, while Splatoon has seen a sequel. In short, if you want a Nintendo console, and can afford the extra, the Switch pretty much has the best of both worlds, with a few exceptions (no sign of a Pikmin 3 port yet.) For reference, here's the pinout I use to connect all my systems to my monitors. A single common pinout means I don't need a seperate monitor cable for each system. Settings vary depending on supported formats. For details, refer to the instructions supplied with the audio device. The other thing to point out is of course, most games do use surround sound and you would be far better off running the PS3 into the HDMI and using the amp for everything!

The Wii U is officially dead, but its legacy lives on with the far-better planned and delivered Nintendo Switch. While the Wii U struggled to capture public imagination, the Switch got off to an incredible start, and has already sold more units after just a year on the shelf. When using an HDMI cable, only [Linear PCM 2 Ch.] audio will be output from PlayStation®2 and PlayStation® format software. To output Dolby Digital or DTS® audio, you must connect the PS3™ system and the audio device using a digital optical cable and switch to [Optical Digital] under [Audio Output Settings]. Select all resolutions supported by the TV in use. Video will automatically be output at the highest resolution possible for the content you are playing from among the selected resolutions. *The tablet-like controller is very clever and lets you interact with the action onscreen in several ways

D-terminal is a connector type used mainly in Japan. The resolutions supported by D1 to D5 are as follows:Select the input connector on the audio device. Channel numbers and audio formats that are supported vary depending on the connector in use. The main console also houses numerous new software features that make it so much more than simply an HD Wii. You might not think it from looking at it, though, as from the outside, it actually looks very similar to its predecessor. It’s 50mm longer and 9mm taller, but otherwise its overall design remains largely unchanged.

The PlayStation 2 can do VGA through this port, however it is software controlled, and since there aren't enough pins for H+V Sync, it uses Sync-On-Green, which not all monitors support. Change the resolution for the video output. Depending on the connector type selected in step 4, this screen may not be displayed. If you select [Linear PCM 2 Ch. 88.2 kHz] or [Linear PCM 2 Ch. 176.4 kHz] in step 5, sound may be intermittent or may not be emitted from some audio devices.Linear PCM 2 Ch.] audio is set to be output from all output connectors by default. If you change the audio output settings, audio will be output only from the connectors that were set.