Right now I have only one repeater plugged in and connected to my laptop via ethernet cable. The 2nd repeater is unplugged. The Wifi on my laptop is switched off and disabled, so I'm actually connected to the Internet via my laptop's ethernet port via ethernet cable to the repeater's ethernet port, then via wifi signal from the repeater to my Zyxel wireless router and Comcast cable modem. The same goes for the latest Wi-Fi 6 and Wi-Fi 6E technologies, the current fastest flavors of Wi-Fi. If you recently bought a new router that supports these standards, you'll certainly want to make sure any range extenders support them as well.

With my control speeds established, it was time to start adding in the range boosters and seeing which ones improved things the best. Pairing each one with the router only required me to plug it in nearby and press the WPS button on both devices -- after that, I relocated them downstairs, to the basement rec room, which was the farthest point from the router that still had a decent signal and speeds. Whenever you're using a Wi-Fi range extender, that's typically the best place to put it: just shy of the edge of your router's range, where it will still receive a strong enough signal to put out a strong signal of its own. The best way to find that spot? Grab your phone or laptop and run some speed tests.Now take a look at the range extender’s app. At the moment, we’ve got the range extender positioned about halfway between our main router and our home office where the Wi-Fi signal tends to be a bit weak. When you have an existing wifi but the wifi range is not long enough, please select Repeater Mode to cover longer range and eliminate wifi dead zones. (Repeater mode doesn’t need to connect Ethernet cable) Long press the reset button for about 20 seconds till the Wireless-N-c signal becomes open and unsecured.

D-Link DAP-1620: This was the only range extender that ever managed to hit triple digits during my 2020 tests, with an average speed of 104Mbps in my bedroom during evening hours. Setup was just as simple as what I experienced with TP-Link, too. I was able to stream HD video, browse the web and make video calls on the extender's network without any issue. But now that the range extender is linked to our router, the app changes the name of the range extender Wi-Fi to use the same name - 0606 Hyperoptic - as our router’s Wi-Fi network. If you used WPS to get started, you may already be connected to the range extender. Alternatively, you can just tap on TP-Link_Extender_2.4GHz to connect your smartphone to the range extender. 4. Dual-band Wi-Fi Wi-Fi mesh systems are ideal for users with little or no technical knowledge. They can be installed in minutes and typically come with a user-friendly mobile app that walks you through the installation process with easy-to-follow illustrated instructions. And their prices are coming down, too. However, the app is telling us that there’s a very good connection between the router and the range extender, so we can still move the range extender further away from the router without losing the connection. The TP-Link app also includes a ‘location assistant’ feature that can help you to find the best location for the range extender. 9. Moving out of range

The wifi extender will scan available wifi signals automatically. Please select the wifi signal that you want to extend. We offer 12-Months warranty for all products against defects in materials and quality resulting in failures during normal use.