The spider wire is of a heavier gauge than higher-end dart boards, and it uses staples to hold it in place, but it’s more affordable than other sisal boards. The outer ring is removable to allow for periodic board rotation. Other accessories include a wall-mounting kit and detailed instructions for mounting the board to meet tournament standards. You may also be able to get a cork board from wine bottle manufacturers that request that you use the cork instead of throwing them away. They will offer this service for free or for a small fee, depending on how many corks they have available at the time. To clean the cork surface of a dartboard, dip a soft brush in warm water mixed with mild soap or detergent. Gently scrub the cork surface to remove any dirt or grime. Rinse the board with clean water and wipe it down with a clean cloth or towel.

The clever foam design is reversible and it also fits together like a jigsaw, and is designed to snap in place around the board perfectly. The fact it comes with a board is a big plus point.

To clean your cork board, you should use Windex or mild soap and water. If you have toothpaste, then that also works well to take off tough dirt that has accumulated on the surfaces of the board. You can then dry it with a cloth to ensure that there are no water spots left on the surface.

There are specific guidelines when it comes to hanging the board. The board should hang so that the bullseye is 5 feet 8 inches off the ground. The toe line, which is the distance from the front of the board to the line at which the dart thrower stands, should measure 7 feet 9¼ inches. This is a very clever design and is our editor’s choice due to the fact that it offers great value for money as well as some fantastic features. It may sound like foam isn’t the most protective, but it does a decent job of stopping the wall from getting chipped and damage. Cork dart board is a very old and simple type of dartboard, where the whole board is made from cork.Cork board sheets are a simple material that can be fixed in many ways. The cheapest and the easiest method is to glue cork panels with a cork glue– see "Best cork tile adhesive glue" section. If you want to apply a big notice board, remember to even the edges of the cork sheets (i.e. with a sharp wallpaper knife) to avoid visible joints. Always adhere to the manufacturer’s instructions when using any product to achieve the best possible outcomes.