Merge WP33-EU and WP34-EU (WP33-EU/WP34-EU). https://github.com/Koenkk/zigbee2mqtt/discussions/12377

FYI, ITead SONOFF ZBMINI-L Zigbee 3.0 Smart Switch installs without neutral wire and is based on the CC2652P (CC2652 P1F) chip. Fungování první verze modulu „bez nuláku“ bylo bezchybné, nicméně velikost modulu trochu komplikovala možnost bezproblémové zástavby do běžných stávajících podomítkových krabic s hloubkou 4cm. Tehdy mě ale zajímala nejvíce spolupráce modulu s prostředím Philips HUE, ve kterém provozujeme náš domácí osvětlovací systém. Problémy první verze ZBMINI-L First of all, sorry if any term is not correct. I am starting with the DIY of home automation and electrical issues, although I know something, I am not a professional. Also, I am not native english speaker person. I’ve not read about any ZHA/zigpy developers working on adding OTA provider to zigpy for sonoff, see:Model number 66492-001 seems to be very similar, if not identical to model 99140-139. Added ['SMARTCODE_CONVERT_GEN1_W3'] which is what my model 99140-139 shows as zigbeeModel when I paired to Z2M, though it looks exactly like to 66492-001 ['SMARTCODE_CONVERT_GEN1']. state_action: State actions will also be published as 'action' when true (default false). The value must be true or false zbminil” firmware image in that repository is for “ZBMINI-L/ZBMINIL” model, and the “zbminil2” firmware image there is for " ZBMINI-L2/ZBMINIL2/" model (also known as “ZBMINI Extreme”). Is the the ITead SONOFF ZBMINI-L connected though a Zigbee Router device or directly to the Zigbee Coordinator?

suppression de la creation du reporting genPowerCfg du endpoint2 pour le device Wireless double remote switch car celui-ci n'existe pas et l'inclusion ne se fait pas totalement (voyant violet et non vert) const fz = {...require('zigbee-herdsman-converters/converters/fromZigbee'), legacy: require('zigbee-herdsman-converters/lib/legacy').fromZigbee}; Separated definition of Zemismart ZM25TQ from big Tuya section with added tz.tuya_data_point_test capability and removal of speed control not supported by this device. Sonoff ZBMiniL2 doesn’t have a power meter function, not a massive issue as the switch will be connected to a source with fixed power consumption. You can get estimated consumption using my flow in NodeRED. The device alone has a minimal power consumption of its own.

Product Documents

It is sorely missing an option to decouple the switch from the relay which would make it a great solution with all smart lighting. Zigbee2MQTT Těsně před napsáním tohoto článku jsem trochu hloubkově zapátral k výše popsané ne-kompatibilitě a našel jsem informaci, která byla nějakým Sonoff insiderem zveřejněná na Redditu : Adding my experience with the Sonoff ZBMINI modules after some initial experience with them, I can summarise the following: In ZBMini’s Lin I put the signal that also feeds the smart bulb, but with this the Sonoff does not turn on.

Attempt to fix brightness and state not reported for HGZB-04D / HGZB-4D-UK. https://github.com/Koenkk/zigbee2mqtt/issues/12292 As the newest in the ZBMINI line, it carries the DNA of its predecessors but is now 40% smaller and 100% better designed. It looks much better with the new curved edge design and the orange stripe. D) The inspector I talked with said a device like this was acceptable for US codes because it had the manual switch override. He also said that using 18-guage wire for the switch would be acceptable as long as the load and line used proper gauge wire for the circuit’s rating. B) When the Zigbee hub is not working, the ZBMINI does still function with the physical switch, just as if the digital relay was not present. Following to issue "TS0601 _TZE200_fzo2pocs (Zemismart ZM25TQ) - position and motor speed issue" #11164Add support for the Livarno remote control that is included in a Livarno Home LED ceiling light (see https://www.lidl.nl/p/livarno-home-led-plafondlamp-zigbee-smart-home/p100339376) Add EGLO 12229 as whitelabel of 33951/33948 and EGLO 12239 as whitelabel of 33957. https://github.com/Koenkk/zigbee2mqtt.io/pull/1369 https://github.com/Koenkk/zigbee2mqtt.io/pull/1367 It has the ability to hardwire a switch (a requirement from SWMBO) and doesn’t require a special switch Next, we will hook up ZBMINI Extreme to some traditional devices in our home. Refer to the diagram below as a guideline showing how to wire the power cable to it. Make sure the mains are turned off during installation. We have two diagrams as examples: a desk lamp and a ceiling light. The relay responds rapidly to both, the input from the switch and the cloud/hub interactions with the app updating the interface promptly. In short – it works as it should. Power consumption

If possible verify that it is also the same problem in the latest Zigbee2MQTT Edge/Dev release (zigbee2mqtt-edge latest dev branch) https://www.zigbee2mqtt.io/advanced/more/switch-to-dev-branch.html With its small form factor and the ability to connect to an external switch, the ZBMINI-L2 can transform an ordinary switch that has only the L line into a smart switch as shown in the picture above. It’s very convenient for houses where family members are familiar with traditional switches, e.g. elderly people, and the newer generation that may be more tech-savvy can enjoy the extra features enabled by the mobile app such as scheduling, timers, count-down, and simple automation by working with other devices. So it’s the best of both worlds! ZBMINI Extreme operation instructions Attempt to fix power monitoring for _TZ3000_cehuw1lw. https://github.com/Koenkk/zigbee2mqtt/issues/12421

Podobně tak s Philips HUE nepracuje také ani např. designově docela povedený SILVERCREST Smart Button (původem asi Tuya), který prodává LIDL jako součást svého Zigbee 3.0 osvětlení. Philips má svůj vlastní velmi podobný HUE Smart Button, který ale prodává pouze exklusivně ve svých Signify e-shopech, a vůbec ho nedodává do běžné HUE distribuční sítě.