BLE_ESP32 (xdrv_79): Start scan as soon as we are connected to a device - saves missing a few adverts.

Raspberry Pi Pico has a lot of interesting and unique features, but it doesn’t have networking. Of course this was only ever going to be a temporary inconvenience, and sure enough, over Pi Day weekend we saw both USB Ethernet and Ethernet PHY support released for Pico and RP2040. Raspberry Pi Pico and RMII Ethernet PHY Higher frequencies come with reduced available bit depth (as by https://esphome.io/components/output/ledc.html). Example configuration entry ethernet : type : LAN8720 mdc_pin : GPIO23 mdio_pin : GPIO18 clk_mode : GPIO0_IN phy_addr : 0 # Optional manual IP manual_ip : static_ip : 10.0.0.42 gateway : 10.0.0.1 subnet : 255.255.255.0 Configuration variables: ¶i know that tasmota is at beta stage for esp32, and i fint this very cheap device that can support also the LAN connection TheLAN8720A/LAN8720Ai connect via an RMII interface.These devices support HP Auto-MDIX†, employ Microchip's proprietary flexPWR ® technology andare available in both extended commercial (0°C to 85°C) and industrial (-40°C to 85°C) temperature range options. I have copy and pasted template {"NAME":"WT32-ETH01","GPIO":[1,1,1,1,1,1,0,0,1,0,1,1,3840,576,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0,1],"FLAG":0,"BASE":1} I also find this https://esp32.com/viewtopic.php?t=5732 but before removing the crystal I prefer to be sure I'm not missing something else.

A better choice seems to be the LAN8720 which costs only 1EUR and is significantly smaller as it only has a RMII-interface an therefore lesser pins. EMAC_TXD0, EMAC_TXD1, EMAC_TX_EN, EMAC_RXD0, EMAC_RXD1, EMAC_RX_DV and EMAC_TX_CLK are fixed and can't be rerouted to other GPIOs. Actually the board has two STM32 chips. One is the target of the demo board, and the other is the STLINK. ESD Protected MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support and flexPWR짰 Technology in a Small FootprintBUT when I turn wifi off (wifi 0 in console or changing wifi configuration to non existing wifi), I also loose Ethernet connection. Installing using the ZIP file and then updating using the Library Manager will result in duplicate libraries.

While we're certainly not thinking of dropping Ethernet for future products, at this point we do not have any publicly announced upcoming chips with Ethernet in it. (I cannot comment on if the feature is in not-yet-announced chips, sorry for that.) Note that you could always add e.g. a SPI Ethernet chip to an ESP32-S3 to get Ethernet connectivity, although I agree that is not as optimal as simply having an integrated MAC. If a non-standard BootLoader has already been written to STM32, connection of nRTS pin and RESET pin is required. Zibee add ``SetOption120 1`` or ``ZbEndpointTopic`` to add the endpoint as suffix in topic when using ``SetOption89 1`` When STM become officially supports external PHY Ethernet, I will delete this repository. Hardware requirements Power and mode must be individually controllable. Some devices may not function properly if the mode is also turned off when the power is turned off.I made a small prototype for the eBox ESP32-T and the Waveshare LAN8720 ETH Board which already has an 50MHz oscillator. ESD Protected MII/RMII Fast-Ethernet PHY with HP Auto-MDIX and SMSC flexPWR TM in a Small Footprint

The entry: #define D_ZIGBEE_NOT_STARTED "Zigbee not started" is duplicated in i18n.h from all language files. This produces a warning while compiling due to redefinition if changing the language in my_user_config.h Rejecting a RMI support is very very bad decision. Now I m forced to search some another solutions, that allows me to stay in low price for bill electronics components and sufficient LAN network performance. For using the thermostat function, publication of the measured temperature was using the wrong name. Changed to the common used name.EDIT: After reading that the lenght of wires can be an issue at 50MHz, I wired it with 10cm wires (instead of 20cm on the photo), still the same. Pin# of the enable signal for the external crystal oscillator (-1 to disable for internal APLL source)