After testing the PH with your dip test strips you can use the following chemicals to increase or decrease the PH. Chlorine demand of water too high at start up, after holidays or due to excess contamination or neglect Not balancing the Total Alkalinity levels in your hot tub can cause a number of issues that can impact your spa experience. Yes, if you miscalculate the amount of algaecide, you can overdo it. This can cause foaming and, in some cases, even irritation to the eyes and skin. You need to know the gallon capacity of your pool to determine the correct dosage. Also, one of the side effects is that the algaecide stops working as it should, it becomes ineffective.

Always pre-dissolve chemicals in a clean, plastic container in a well-ventilated area. When pre-dissolving chemicals always add chemicals to water and not vice versa. Always add the chemicals to the water. Algaecide can kill algae, but it is best used as a preventative measure. Its main advantage is that it does not change the pH of the water, but at the same time it prevents algae from growing and developing in your pool. What’s more, the algaecide works in tandem with a chlorine sanitizer to keep pH levels balanced.Outdoor storage areas for your hot tub chemicals should be situated away from anything flammable. Keep any petrol-powered equipment, like your lawnmower, in a different location. The storage area should also be away from sources of heat, like an outdoor fire pit or BBQ. Clearwater pH Minus , also known as ‘pH reducer’ is the most simple and effective way to decrease the pH of your spa water when it has surpassed the recommended level. pH minus can also be used to lower TA (Total Alkalinity) levels. Around 60% of UK households are in hard or very hard water areas. To avoid scale build-up (which can impact water quality and pump components) use a weekly dose of ClearWater Scale & Stain Controller.

Clearwater pH Plus , also known as ‘pH increaser’ is the best way to increase pH levels that have dropped below the recommended level. To avoid skin discomforts and enable the chlorine in your spa to work effectively, it’s vital that acidity is monitored and controlled. The recommended pH balance of spa water is between 7.2 and 7.6. Chlorine is a sanitiser that controls and prevents bacteria growth and is essential for the hot tub water to be clean and safe to use. The recommended Free Chlorine* level in a hot tub is 3-5ppm (parts per million). If you are going away we would suggest emptying the pool and cleaning it so the water is not left to go stagnant. Do no re-fill until you return from your trip. ClearWater® is our chosen and recommended chemical provider. Developed with Lay-Z-Spa in mind, the range of ClearWater® hot tub chemicals includes everything needed to make sure your Lay-Z-Spa's water stays safe, clean and clear. Explore the table below which includes each product’s use and function.To accurately determine the correct flow for the scrubber, the tray should be full of water but not so much that it is overflowing over the sides. Overflowing over the sides will increase the sound coming from the scrubber. Algaecide is a swimming pool chemical to kill or prevent algae from growing in your pool. Its job is to interrupt important processes inside the algae, stopping photosynthesis or provoking an explosion of the algal cell walls. It is best to use an algaecide in combination with a chlorine sanitizer to keep the pool water clean.

When you’re ready to begin mixing your chemicals, you should handle them with chemical resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. It is also advised to wear tightly sealed goggles and appropriate protective clothing such as long sleeves, trousers, and closed-toed shoes that fully protect your feet from spills. You should also wash your hands after handling chemicals. Add algae concentrate or copper chelate solution to the water, depending on the needs of your pool.pH measures how acidic or alkaline your water is and the ideal range for hot tubs is between 7.2 and 7.6. Balanced pH is necessary for other chemicals to work properly and imbalanced pH levels can impact your hot tub components and cause skin irritation.