When you find your heater doesn’t turn on manually, then the problem may happen for the following reasons: So, when you are getting or noticing the F5 code, it means you are told to select the highest brightness or you have selected the top brightness on your heater. The timer button allows for automatic shut-off after 30 minutes, an hour, and all the way up to nine hours in hour-long increments. We also tried toggling through the five levels of flame, including running the heat with no flame at all.

There are basically four controls—Power, Temperature, Flame, and Time—and we found that the icons made the functions clear. We were able to set the temperature to the degree; the unit heated until it sensed the ambient temperature at that level.

Or there is a loose connection in your outlet for which your heater is not getting power and popping ER error code. Whenever the FLAME button is pressed, the power of the flame reduces. It has five brightness levels that can be selected. 3. Heat Button Duraflame 1500 Watt Infrared Quartz Cabinet Indoor Electric Space Heater With Thermostat And Remote Included In The Heaters Department At Com

You can adjust the thermostat by 2°F or 1°C increment. To do this, simply press the ‘Heater’ button on the control panel. However, when you want to change between °F and °C, you have to press and hold the ‘Heater’ button on the control panel for 3 seconds. Well, the button on the remote control only turns the heater on/off to the thermostat setting that is selected with the control panel. Is it safe to place the heater unit on the carpet? However, with great fireplace comes great responsibility. You’ve got to maintain your chimney and the flue, clean up burnt logs and keep pets and kids at a safe distance. Electric fireplaces are a modern option that requires tiring upkeep and cleaning out of the equation. Be certain the plug fits tightly in the outlet. Heaters draw more current than small appliances. Overheating of the outlet may occur even if it has not happened with the use of other appliances. 10. Remote Control Is Not Working If you notice the “E3” is shown on the display, first visually inspect whether the air inlets and outlets of the heater are broken or not. If they are broken, the issue will cause overheating.If you already have a fireplace, you can save yourself a lot of time and energy by installing an electric fireplace insert. You won’t have to worry about ashes, extensive chimney maintenance or cleanup anymore. And in case of noise while shutting off or flaming on, replace the flame generator drive motor of the heater. Yet, if you find the problem remaining, then seek customer service from Duraflame. Additionally, in our arid climate, the humidity-neutral infrared heat was preferable to electric heat that dries out our already dry air. The infrared waves provided heat more akin to sitting in direct sun or in front of a real fireplace, though those effects faded considerably if more than about 4 feet away from the front of the unit. This electric fireplace uses infrared heating technology. This means that it produces heat much as the sun does by providing heat without the dryness associated with burning wood and a real fire. The heater can effectively heat a space up to 1,000 square feet and has different heat settings for optimal comfort. Fireplace Appearance On the way to knowing all about Duraflame heater instructions, let’s first learn about Duraflame infrared quartz heater troubleshooting: Duraflame Infrared Heater Troubleshooting