Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Both have sand binder in them and work in similar ways however EASYSeal BCS is the superior product and lasts longer. Apply a final rinse of water across the surface to wash off any EASY Joint residue and to aid the final compaction process.

High Quality Paving Jointing Compound - It is suitable for all types of paving products as long as a minimum gap of 3mm and 25mm deep. EASYJoint brush-in patio grout , is a really simple, fast and DIY friendly way to fill the joints in paving slabs and flagstones. As well as larger tools such as plate compactors for compacting loose soil, gravel and sand, block cutters and paver sets. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money. When you clean the patio hold the power washer at an angle of about 45⁰ degrees and using a fan spray from no closer than 150mm from the paving joint.

EASY Joint can be cleaned to remove these particles by using a light pressure wash (see cleaning instructions). EASYJoint can be applied in virtually any weather conditions, however it is best practice to ensure that ground temperatures are greater than 3 degrees during the grout installation.

The person with the hose should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of them so that the paving is always wet. Our sealers can protect against most common spills and are resistant to tea and coffee, red wine and engine oil, mayonnaise, vinegar, and ketchup etc.

Jointology is the science of proper jointing for all kinds of small element paving from cobble to flags. EASYJoint brush-in patio Also do not use the same broom that was used to apply the EASY Joint to clear the surface afterwards; it will be contaminated and may leave marks.