li class="ml-20">* Excludes some Online Exclusive lines - Items sent directly from the supplier (some Online Exclusive lines and Car Parts) can take up to 10 working days. National Tyre Service Ltd Registered Office: Icknield Street Drive, Washford West, Redditch, Worcestershire, B98 0DE United Kingdom. Using more power through the same circuit could possibly over load the relay, connectors or PCB tracks. All applications are assessed individually by Klarna and decisions are based on individual circumstances.

Otherwise you'll have to wait for someone with a 2018 Civic to answer your question, and unless the Civic trim levels are the same, even then you wouldn't be 100% sure. To begin the installation, locate your vehicle's fuse box, commonly found under the steering wheel, in the glove box, or in the front footwell.

To me that would mean the fuse tap is faulty with a short circuit inside it (does that ever happen) or the camera isn’t wired to that fuse tap in the first place. To hardwire your Viofo Dash Camera, you will need to remove one of the fuses from the fuse box and replace it a Viofo Fuse Tap. This may not blow at the correct amperage or fast enough to protect what ever is attached to that circuit. Went to use the product, fuses didn’t fit in and upon closer inspection as you can see in the image the metal doesn’t line up so fuses don’t fit. Additionally, our installer recommends starting off batteries to draw power on low initially, letting them run for a few days before increasing to high if necessary.

Most importantly, please avoid using any of the fuse slots that are utilized by important parts of your car, like the engine modules and airbags. Requiring a single mounting hole makes it easier to install compared to taps that require separate holes for hot and cold water controls. p>To access finance with Payment Assist, you’ll need to have a web enabled device with you at point of purchase.My point is that whichever way you put it, taking out the top fuse will always stop the power to the dash cam from that fuse tap. Having the tap the other way around means all current passes through the original fuse and maintains its 30A protection. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH).

Obviously, you can do whatever you're comfortable with, but for me it was important to orient the fuse tap properly to ensure that the original circuit was still protected by the original fuse, and that the dash cam was protected by the dash cam fuse (not the original circuit fuse). Have a quick look in your vehicle manual to find out which kind you need and select it from our available Fuse Taps. Once you've identified proper ACC and Constant connections, proceed to crimp the hardwire kit wires to the add-a-fuses. The thickness of the blades which push into the original fuse holders are slightly thinner than the fuses themselves and therefore tend to fall out easy . No cutting of wires or splicing is required, you simply crimp a fuse tap on the end of your accessory device's bare wire, then plug and play at the fuse box.

Also the dash cam will always be protected by that fuse regardless of the rating of the other fuse and orientation of the tap. Most cars have an obvious ground point near the fuse box, possibly already used by existing components.