It has however worried me, I appreciate I need to get a diagnostics to check done but in the meantime turned to you fine people to see if any answers could be found. The sender sits in a plastic cup, and on older style Expansion jugs, they didn't have a "Air Bleed" hole at the top so your sender can be sitting in a air pocket and not in the fluid.

Golf MK2 Diesel, running fine until today, went to start and Glow plug light came on briefly then started to flash, then went out. After killing the engine if I push the start button once without actually starting the motor, the glow plug light initially illuminates then extinguishes. However, the only time I have heard of a flashing glowplug light, WITHOUT an engine light and with no faults; it was an EGR valve problem. I won't go into details but the brake light switch sends info to the ECU to prevent the engine accelerating when the car is being braked. I have the same and for the life of me can’t find an eeprom tool that will read the mk5 cluster using a VCDS plug!the technician said the motor only flashed a glow plug code and would not start the motor with the ASV ECU.

So it turns that when I move near to the car the red LEDs on the fobs flash (the nearer I get the quicker they flash) then when I move away from the car they flash slower then stop when I’m about 20feet away. But that code usually mean dash is bad and can not be fixed, either flash or hardware is damage or corrupted. Anyway sometimes when shifting back to park the PRNDS lights flash seems like this is an issues that occurs for some). In trying to create a great purchasing experience, Ping would like us to discuss your requirements with you prior to you making your purchase. Depending on which controller is fitted to your vehicle, a flashing glow plug lamp indicates an open circuit plug.A forum community dedicated to Audi, Volkswagen, Porsche, and all turbo diesel owners and enthusiasts. As said before though, I haven't noticed any engine performance issues and with no codes or DTC in memory, really makes it difficult to determine. But to really find out what is going on one will have to scan the system to see if there are any fault codes. The car drives fine but when i turn off the engine and close the doors after a few mins the hazards continue to flash and will only go out when i start the engine.