Charnwood W629 10'' Cast Iron Table Saw with Sliding Carriage

Product Information

This is the only choice for those wanting a decent cast iron table bench saw and accurate fence but can't accommodate a 16A supply, as it works of a UK 13A plug. It's not quite as powerful as my older Bosch contractors saw but once set up is very accurate and cust well. First thing I did was change the blade to a 60T TCT. Lets get the niggles out of the way first:

Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floor stand, adjustable feet, 1.7m power cable and UK 3 pin plug. The fence needs lifting slightly to slide it without damaging the work table as the cast fence support attached to the fence can catch the table. I cleaned the table off and applied a was paste to it to prevent rust and did the same for the mitre table which by the way is excellent but a PITA to set up if you need to adjust the accuracy. Mine was pretty much spot on from the factory. Whether you need router tables, dust extractors, a morticer, bench grinders, or anything else, Kendal Tools & Machinery is thrilled to present a wide array of Charnwood woodworking machinery, perfect for any job or workshop space you may have available to you.

A larger version of Charnwood's best selling 8" saw with the same compact design, highly accurate saw with a quiet induction motor. There are now 3 ways to configure the table saw. The sliding carriage can now be fitted on either side of the bladeso that you can work on the left or right. If you are not using the sliding carriage you can fit one extension table on either side of the blade or both on the right hand side or both on the left hand side. Table saws are made of a motorised circular saw blade that protrudes through the top of a table to cut wood that is placed on top of it. These have many functions and are used very commonly used across all varieties of woodwork. As such, please reach out to us if you require any further advice, we would be happy to assist you in fulfilling your project’s needs.

Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floorstand, adjustable feet, cable and plug.

Choosing the right tool for the job will ensure your project runs as smoothly as possible and is completed to the highest standard. Motor (induction) Braked 2200w (3hp) / 240v, No-Load Blade Speed 4000 rpm, Minimum Blade Width (Kerf) 3.0mm, Dimensions (WxDxH) 1480mm x 1000mm x 1100mm, Weight 110Kg, Rating Light Trade, Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floorstand, adjustable feet, 1.7m power cable and UK 3 pin plug. Bandsaws consist of a motorised blade that houses continuously toothed metal sheets. Inner wheels drive the blade and can cut a mix of materials including plastic, different varieties of wood, and metal, with the correct type of blade.

Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a pleasure to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. Charnwood W629 Specification: Maximum Ripping Width Using Fence 730mm, Maximum Crosscutting Width 500mm, Blade Tilt 90 – 45 degrees, Mitre Guide T-Slot Width 15/19mm, Mitre Guide T-Slot Depth 7mm, The main table is precision ground cast iron and also has 2 fabricated side extension tables to give impressive cutting capacities. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. The W629 has now become our best selling table saw model. The cutting capacities are big enough for any hobby workshop, providing a level of accuracy only normally found on industrial machinery, with a compact foot print suited to the average sized workshop. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floorstand, adjustable feet, 1.7m power cable and UK 3 pin plug.Professional workshop operators should also look at the W650. Built specifically with the professional in mind it has enhanced cast iron components. I would have preferred seeing a belt drive rather than direct shaft drive at this price, but all things considered it is a quiet, reasonably precise bench saw which whilst fiddly to accurise, once set up is easy to use and makes accurate cuts. I use it in a professional workshop and for the money it's very good, and unlike some other similar machines from other companies, is trade rated so the motor is rated for at least an hours use per day or over 300 hours annually which is about what I use it for. Dust extraction from the blade cover is poor. You need a powerful extractor to make using it worth while; Overall though for the money it's a solid and decent enough machine. I would have liked the bevel cut to be 45 degrees in both directions but you only can tilt it right. The scale is accurate when set up properly to the 90 degree mark, for all other angles. The writhing knife cannot easily be removed for blind cuts when making shallow rebates...it's a nightmare to replace it if you do remove it and took me 15 minutes as reaching the nut and bolt whilst holding the shims and stop plate in place needs care and dexterity!

W629 10 inch Cast Iron Table Saw / Bench Saws is our best selling item and is perfect for any woodworking shop. Charnwood introduced the W629 in 2015 because of the success of the popular W619 8″ table saw. Consequently the W629 also utilises the same overall operating specification but possess an enhanced 3HP motor and cutting depth therefore providing the user with greater versatility and ability. The heavy weight of the the table saw makes it necessary for someone in attendance when it is delivered. Specifically built and specified for the home worker and small professional workshop W629 is consequently rated light trade. Furthermore maneuverability around the workshop a wheel base is also the perfect addition.

Sanders, mechanical or manual, are used to smooth, polish, and clean up the surface when finishing a project. Used well they can accentuate the beauty of the wood by showing off its grain without the need for extra adornment or painting. Shaping wood for aesthetic effect is a very important part of any woodworking project, and helps to ensure that as well as being structurally sound, any project you complete is visually appealing too. A crucial step of this is a final sanding to ensure the finish is consistent. For 40- years, Charnwood has supplied a wide range of woodworking products for trade and hobby, and Kendal Tools & Machinery are proud to supply them to you at the best possible prices.