4'' Smooth Wheel Replacement for Hoverkart, LS&GHY Hoverboard Go Kart Front Rubber Wheel Replacement

Product Information

Easy Control with More Fun: Easily Shifting accelerating, turning, and brake smoothly via 2 hand control bars. The 360° flexible PU front wheel let you turn around freely If necessary, re-level the hoverboard footpads so that they are even and parallel to the floor, and so that the kart handles are positioned upwards on the diagonal. This warranty gives you specific legal rights, and you may also have other rights which vary under local laws. The following conditions comprise the requirements and scope of our warranty conditions and do not affect our legal and contractual warranty obligations. Troubleshooting: If after inserting the screw into your footrest, you cannot toggle the footrest at all, you have likely inserted the screw without the two holes properly aligned. Remove the screw, realign the holes, and re-insert the screw.

Please note that this is not a guaranteed next day delivery service, and we do not take responsibility for any delays.) If necessary, free the loose ends of the Velcro straps and the wire on the underside of the seat kart so that they are accessible. When seated on the kart with both feet positioned on the footrests, riders should have a slight bend in the knees. Shorten or lengthen the kart, if necessary, to accommodate the size of the rider.With the hoverboard charged, calibrated, and powered off, level both sides of the hoverboard so that they are evenly aligned and parallel with the ground. Warranties that have been activated do not cause the warranty period to be extended, nor do they trigger a new warranty period. The warranty period for any replacement parts installed ends with the warranty period for the entire product.

Please make sure your hoverkart requires this single bolt type wheel, as some do require 4 bolts (see our other items for this type) Locate the 2 holes on each footrest: a large hole on the end that will slip onto the kart frame, and a small hole for the screw that is inside the curve on one side.From your collection of hardware, look for the 5 washers and 5 large metal bolts. (Not the largest plastic ones; you’ll use those later.) The Remix hoverboard can take up to 4 hours to reach full charge. Prior to your first ride, plug it in for a good charging session. Compatibility & Flexibility: This universal hoverboard seat attachments can fit most 6.5'' 8'' 8.5'' 10'' hoverboards. Length can be adjusted between 31- 44 inches. Suitable for riders between 100cm – 200cm. max load is 100 Kg