Joined in 2023 
82 
63 About this deal
Post and Wire systems are not appropriate for combating high-pressure bird infestations, where birds are roosting overnight or nesting.
If you’re searching for a low-profile, yet eco-friendly bird deterrent solution, look no further. Bird prevention wire from Bird-X repels pests naturally and does not make a big visual impact or distract from the aesthetics of the building when viewed from ground level. Bird wire is also a less aggressive-looking method of preventing flying pests compared to bird spikes, which due to their constructive nature, appear far less humane. Bird wire and post deterrent systems are used to stop birds perching on ledges and parapets. One of the main advantages of using bird wire is that once installed they are very discreet. Wire posts have a low profile which means that in some cases they cannot be seen from street level on high ledges. Because of this bird wire systems are usually used in places like town centres and on office buildings.
Problem Species
Yes, bird wire is an extremely safe and humane product to use to control birds. However, laws are changing fast when it comes to obtaining a gull licence, so we must have a range of services available to help combat the health and safety threat birds cause. Nationwide installation experts Post and Wire systems are Ideal for use on ledges, parapets, signs, beams, parapet copings, pipes, hand rails, gutters & roof ridges etc Step 5 – Lengths longer than 2 metres: Two metres is the maximum length the wire can be run between 2 rows of Defender® Post and Wire. For longer lengths more rows can be added, each up to 2 metres distant. Wire up the first two rows as described above. You do not need to add an additional strip to the centre if you need 3 rows. The eyes in the centre row can be used again and are double-stringed. Again, alternate the spring. If one side already has a spring attached, start with just the wire and vice versa. The third row should be installed with the anti-topple pins facing the other rows. Post and Wire bird control systems are often preferred by customers who require a low visibility system to deter birds. Often post and wire is the go-to solution for listed buildings and can be specified by architects and project managers. It is also a good option when there is a large flat area such as a roof, that needs protecting from pigeons or seagulls. Why is the Defender® Bird Post and Wire Holder System innovative?
Bird wire is a fantastic bird proofing and control measure offered by Falconry Services. Also known as anti-perching systems, we have the capabilities to install these across the UK to help protect our customers from the threat and risks caused by birds. It is important that your bird wire system is installed correctly, and it takes some planning to set it all up. You will have to monitor your nuisance bird problem to see where the roosting and nesting is so you are able to place your bird wire in the most effective place. Here are some tips on how to install your bird wire. Make sure to read the product’s instructions carefully for full directions. Special Attachments: Pipe clamps, gutter clamps and beam clamps are available for installing on a variety of surfaces Although windows and ledges are the preferred locations for these systems, we can use alternative posts to allow the wire to be used in more places across building facilities. Is bird wire safe?As the manufacturer of Defender® Bird Spikes, Jones and Son Pest Control Supplies Ltd, we keep a close eye on the quality of the bird control products we produce. All our pigeon control products are made from high-quality materials such as Durolon; a UV Stabilised Polycarbonate, and 304 Grade Stainless Steel for the pins, which makes for an incredibly reliable bird control solution.
Bird Wire is a post and wire system that provides an unstable landing area for pigeons, seagulls, or crows. When birds try to land on the wire, the unique spring wire system will create a sensation of instability, causing the birds to move on to a more stable landing area.Nylon Coated Bird Wire is a core component of the Bird Wire System. The coated wire is suspended between bird wire posts to prevent large birds from landing.Bird Wire is a low profile bird deterrent system ideal for handrails, ledges, rooftops, parapet walls and other areas large birds are landing. Bird B Gone offers a complete line of professional grade bird wire installation components. How it Works: Nylon-coated spring-tensioned stainless steel wire is attached to stainless steel posts at differing heights and intervals, the bases are drilled into the surface or glued on An almost invisible tensioned Bird Wire system to prevent birds perching without damaging the aesthetics or construction of the building. The post and wire system should be installed properly by a professional bird pest controller, since the wires need to be positioned and tensioned correctly for the system to be effective. It can be installed onto virtually any surface that will support the vertical posts. This includes metal and concrete structures, as well as roof ridges, making the anti-perching system suitable for many applications. Moreover, the longevity of bird control wire makes it a cost-effective solution. A big allure to using this type of bird deterrent versus another is that bird wire is difficult to see, and does not make a big visual impact or detract from the aesthetics of the building. It is a long lasting product and doesn’t require much maintenance if installed properly. How To Use Bird WireEco’s Bird Wire System consists of a fine, nylon-coated, spring-tensioned stainless-steel wire supported by stainless steel posts, which are fixed into stonework using nylon anchor rivets. The basic concept is to place thin stainless steel wires, tensioned with springs, just above the ledge or other feature used by the birds. The wires present a physical barrier to the birds’ normal landing behaviour and even if they do find a way to land, the unstable feel of the spring-loaded wires will deter all but the most persistent birds. Each 33 cm moulded strip can hold up to 11 posts. This system means the first post is taken right up to the very front of the leading edge to be protected, even if the ledge is rounded or part-missing. Any small sections that are uneven or damaged are simply bypassed and supported by the rest of the base. The components used for the pigeons and gulls differ in that larger and more robust components are required for gulls. Eco's Bird Wire is one of the most discrete and widely used anti-perching systems available in the UK. It is effective to prevent both feral pigeons and gulls from perching on the ledges and parapets of buildings.
Defender® Post and Wire Strips are the favourite bird-proofing system recommended by architects, especially on listed and historic buildings. The reason for this is due to the low visibility of the wire from the ground. Traditionally, Post and Wire was a complicated system that required drilling and specialist tools. However, Defender® Post and Wire negates the need for all specialist knowledge and equipment. Post and Wire systems provide the perfect solution for ornate building façades where the anti-perch system’s visual impact is an important factor to be taken into consideration. It is also a very economical method to use on deep ledges and sills where anti-perch spikes may be too costly. At Pest Solutions, we deal with pest bird problems on a daily basis. That means we are hugely experienced in treating these issues and can use a variety of different solutions to keep pest birds away from your property. Often, a simple bird wire system is enough to deal with small-to-medium-sized infestations. However, to find out whether or not this approach will work for you, we are pleased to offer a completely free survey to anyone interested in our pest control services. One of our expert pest control technicians will come out to your property to assess the issue at hand and come up with the optimal solution to deliver the results that you need. Bird wire systems are made from spring tensioned stainless steel wire attached to posts at the edge of the ledge or window sill; these posts are securely fixed to avoid them becoming loose. The wires are usually held in position by vertically mounted stainless steel posts, but numerous other fittings have been developed to enable the system to be used in many different situations.
Step 2 – Spacing: Work out where you are going to place the strips - 2 rows of strips is ample to use for a ledge up to 2 metres long. The strips are placed with the double-headed post as close to the leading edge as possible with the anti-topple feet pointing towards each other to aid stability. If the width is smaller or wider than a strip, it can simply be broken into smaller pieces or additional pieces added to the row. In addition to nylon-coated wire we also supply bird coil systems . This is another discreet ledge-proofing solution and is easy to install.Bird-Coil can easily be cut down to suit different ledge lengths. When installing you must ensure the gaps between each coil do not exceed 40mm and that the coil hangs over the ledge by approx. 12mm. Pest Bird Wire Systems are a cost-effective, extremely versatile and totally humane bird deterrent system which can be used effectively to keep pigeons and gulls off buildings and structures. Sprung Bird Wire Systems can be adapted to fit almost any building or architectural feature. This system is only suitable for light to medium Pest Bird Infestation pressures. Previous bird wire systems were notoriously difficult and complicated to install and required professional bird control technicians to put them into position. These systems required precise measuring, drilling, and specialist tools. The Defender® Bird Post and Wire Holder has been designed to simplify installation and make it accessible for all property owners. Why should I use a post and wire system?
Great Deal 
New Comment