LadderLock by Ladder Lock

Product Information

ALL Ladders Extension Ladders Combination Ladders Telescopic Ladders Roof Ladders Glassfibre Ladders Single Ladders Simply hook the Ladder Guard over a rung on the ladder, with the bottom of the Ladder Guard as low as possible on the ladder, but without touching the ground (PICTURE 1). Our painted mild steel ladder guards are painted yellow as standard, but are available in any colour as a bespoke product. Whether the places that the scaffold abuts public areas are common areas or under controlled private ownership.

The fencing should be installed as the scaffold is built, lift by lift, which means either writing this into the scaffold contract or having a separate contractor working with the scaffolding contractor so that there is no lag between the scaffold going up and fencing being fitted.

They must make each rung unusable – ie no more than 50mm of rung should be exposed when the guard is pushed as far sideways as possible. All our standard Ladderguards are available in several materials; aluminium, galvanised steel, stainless steel and painted mild steel. At ground level the full length of the scaffold may need to be fenced. This can be particularly important across ground level sway (longitudinal) bracing. In addition, there should be no projecting first lift transoms or ledgers that may aid climbing; and the use of scaffold fans, or sheeting of lifts can also help deter opportunistic access.

Within buildings, where fixed ladders are used to access internal plant, equipment and various levels within the Technical Guidance TG 20:13 A comprehensive guide to good practice for tube and fitting scaffolding - Operational Guide.

No more than 50mm of exposed rung should be visible when the guard is tight to one side of the ladder. Other Controls

Podium Steps & Low-Level Scaffs Chimney & Roof Scaffolds Garden Scaffolds Stairwell Scaffolds Zone 1 GLASSFIBRE Safety Towers If a standard Ladderguard does not suit your ladder, then we are happy to provide a quotation for a bespoke ladder guard, design tobuilding, a Facility Manager may choose an L1 or L2 Ladderguard. These ladder guards are shorter than the L3 and L4 As an alternative to our standard L3 ladderguard, we also offer the L78 Ladderguard, which is a yellow painted steel ladder guard, Other standard variants of our Ladderguard include our ‘ships ladder’ guard which is designed for slightly angled ladders with Whilst signage is appropriate, this is a low level of control and unlikely in itself to deter children.