Amps/DACs: FiiO E17K Alpen 2, Woo Audio 3, Sony TA-ZH1ES, Schiit Asgard, Cambridge Audio DACMagic Plus, Shanling UA3, PENON TAIL DAC/AMP In truth, a well designed single-ended amplifier featuring unbalanced connections is capable of truly excellent audio performance. Certainly, it can be superior to a poorly implemented balanced design. The inverse is also true. IEMs:7Hz Legato, 7Hz Sonus, AKG N5005, DUNU Falcon Ultra, Final E500, Final E5000, Fiio FX15, Hidizs MP145, JVC HA-FW1800, Kiwi Ears Quintet, LetShuoer EJ07M, LetShuoer S12 Pro, Mangird Xenns Up, Moondrop Variations, Penon Fan 2, Simgot EA1000, Simgot EA500, Simgot EM6L, Simgot EW200, Sony XBA N3, Sony IER-M9, Tanchjim Kara, Tanchjim Oxygen, Tangzu Zetian Wu, Tripowin Olina SE, Truthear HEXA, Yanyin Canon II Do not try what you suggest! The 3.5mm plug on your headphones indicates it is not a balanced connection but single ended. (The reason it has 4 connections is 1 is for the inline microphone). Trying to connect to the balanced output from the BTR5 could easily damage the unit. The reason the balanced output is a smaller size (2.5mm) is to avoid exactly that happening. You would need different headphones – ones designed for a balanced connection – to be able to connect it to the BTR5 2.5mm balanced output. Hope that clears it up! The Liquid Platinum is Amazing. I just got one about a week ago. Best amp I ever got and power to spare.

Balanced Headphone Replacement Cable Online EarAudio HiFiMAN Balanced Headphone Replacement Cable Online

My question is do I just buy two separate female 3pin xlr to 3.5mm interconnects? Do they have to be labeled balanced if I am just buying two separate ones? I thought, if I just buy something like a balanced 3.5 to 4.4mm cable, problem solved right ? Nope. For some reason, Denon themselves said in a Q&A, that we should NOT use a balanced cable with MM400, because it “may damage the coils”. Now I have a few questions. Balanced proponents such as Headphone.com declare that “balanced-drive delivers a noted increase in audio performance due to the doubling of the amp’s voltage slew rate…”. Slew rate speaks to the speed of an amplifier. It is defined as the maximum rate at which an amplifier can respond to an abrupt change of input level. Would it be better running an audio cable between the Fiio M11 DAP and the N90Q or would it be better to run a USB cable between both of them? I guess the latter one?You should be ok with a balanced headphone cable connected to an unbalanced source. The reverse (unbalanced headphone cable to balanced source) is when potential to damage the source occurs. Just to make sure I understand correctly and also that I explained correctly, please see "diagram" below: The connection between devices is considered a line-level connection and is relatively standardized between consumer devices, unlike the output connection to headphones. Line-level inputs on the Bryston BHA-1 headphone amplifier from av2day.com .

4.4mm Balanced Audio Cable 8 Core In-Ear UGREEN MMCX to 4.4mm Balanced Audio Cable 8 Core In-Ear

Whether you are connecting their ZEN series or other balanced components, iFi's audiophile-grade cable will enhance your listening. It has been created to give you maximum quality balanced signal transfer and minimum interference. It all depends on what you think will have the better sounding DAC. Digital out to move the digital to analog conversion process to the second device. Analog out to decode internally and just use the headphones as an amplifier for the analog signal.Balanced has clear advantages in professional audio applications and noisy environments, but for us headphone enthusiasts, it really is going to come down to the individual component (or components) in the audio chain. There are equally as many cases where properly implemented simple unbalanced solutions (rather than balanced) will be the clear winner. A possible negative side effect of an unbalanced connection (line level or headphone) is the potential for unwanted noise, interference or hum to be introduced to the signal. Because the ground is linked, wayward currents from power supply transformer leakages or stray capacitance can become part of the audio signal. Whether you encounter these connections depends on the complexity of your personal setup and whether the source, DAC, and amp all are contained within one integrated device or are connected via external cables. Certainly, balanced line-level connections normally only appear on higher end gear.

4.4? | Headphone Reviews and Discussion - Head-Fi.org 2.5 vs 4.4? | Headphone Reviews and Discussion - Head-Fi.org

Balanced audio is great for pro use with long cables and electrically hostile environments. But it’s generally more of a liability than an asset in home audio gear. All else being equal, balanced stages usually have higher overall noise and distortion than their unbalanced counterparts. Headphone drivers don’t magically somehow work better when driven by a balanced source.” – NwAvGuy Balanced Connections Are More Powerful and Faster Sony as usual pushes for new connectors type because this is just lazy marketing to do when you don't have anything else to promote.I have been told that a 4 pole connector cannot match up to the 6 connectors in the dual XLR’S. Is that logical? Or true?