Finally, slip the vinyl or plastic washer over the stud and slide it up to the hinge plate. This sits between the hinge plate and pan and protects the pan from scratching. Step 2 – Adjust the Hinges If you are thinking of changing your toilet from a close coupled to a low level toilet, take a look at the project we have on this, the old seat may not fit the new loo.

When working with toilets, health and safety must come first! The toilet is obviously a place that can harbour harmful germs and is a source of potential infection therefore precautions should be taken before starting the job. Fitting a new toilet seat is basically a reversal of the removal process. Make sure that the nuts are secure but not overly tight, as the plastic screws will not take a lot of punishment before they give way and strip the threads or snap. Altering the location of the fixing bolt in the hinge plate can move the position of the hinge forward Typically the toilet seat is fixed to the pan by two long screws, one end runs through the base of the hinge and then through the pan using the holes supplied by the manufacturer. A washer and nut are then added and tightened from underneath that then holds the seat in place. These kits are even easier to fit as all you have to do is insert the fixing plugs into the pan, position the seat in place and ensure it’s uniform to the top of the pan and then insert the screws and screw them up and you’re finished. Tips for Fitting Non-Standard Toilet Seats

The Verdict: Best toilet seats

In pretty much all cases your toilet will be shaped to fit a particular type of seat so replacing a toilet seat will have to be done on a like-for-like basis so that you can be sure that it fits correctly. The most common type of toilet seat found in homes across the UK is the plastic toilet seat due to it’s ease of cleaning and cheap cost both to produce and buy. Once finished you should also clean any and all tools that you have used. Tools Needed to Change a Toilet Seat When replacing a toilet seat you have to be absolutely sure that you are replacing the old one with one of exactly the same size so that all supports on the base of the ring sit flat on top of the pan Typical stainless steel toilet seat fitting kit that includes hinges and bolts How to Remove a Toilet Seat

Depending on what type of hinges you have will depend on how they are fixed. Some hinges have no adjustment and simply fix in one position and if this is the case for yours then simply position them over the fixing plugs, insert the screw down through the hinge and into the plug and then screw it up.

Can I Collect My Order Instead?

These measurements tell you what size you need. Toilet seats will show the width and depth in millimetres. The fixing itself normally works in the same way as a wall plug. A plastic sleeve pushes down into the hole in the pan and then a screw or bolt screws down in. As it screws in the sleeve expands and grips tightly in the hole holding it firmly in place.

As there are many different types of adjustable top fixing hinges you will need to refer to the manufacturers instructions included with the kit on how to adjust correctly. Soft close hinges are, in our opinion, one of the best inventions around, as there’s nothing more rage-inducing than the sound of a lid-slam in the morning. Soft-close seats are easy to operate and can now be bought very cheaply. Ultra-Slim Seats This bar has 2 blind holes and the method is to locate the spigots into the blind holes which also incorporate a tiny grub screw with an Allen head. A tiny Allen key is required to secure the grub screws to the spigot. However, once adjusted, hold the hinge so it doesn’t move, pop the screw down in and screw it up tight and then repeat for the other side. Step 3 – Fit Seat in Place Toilet seats are generally made of one of 2 different materials: wood or plastic. Depending on the style and longevity you are going for will depend on what type of seat material is best suited to your needs. Wooden Toilet Seats

Fitting Top Fixing Toilet Seat Fittings

Fitting a toilet seat using top fixings is fairly similar to a bottom fix seat, with the difference of exactly where the fixings are located. Follow the steps below to fit one: Step 1 – Insert Top Fixing Plugs The majority of modern toilets now come with top fixing seat installation as they are easier to fit and remove for cleaning. The toilet seat fixings you need for your toilet will largely depend on the type of toilet seat you want to fit, or the fixings you are replacing on your current seat. D-Shape: These seats tend to be modern so suit modern bathrooms and toilets and they are a little larger than more traditional toilets

The only solution to fix this is to remove the seat and tighten this properly. Most people forget to do this in the excitement of fitting their new seat! Step 4 – Fit Seat and Fixings As you would imagine, instead of a securing the seat in place from below using a nut on a bolt that runs through the pan, the fixings are screwed down from the top into the top of the pan in the same way you would screw a screw into a piece of wood.Where metal nuts or wing nuts are used, depending on how old they are they might be very corroded and can be a nightmare to remove. If this is the case, soak them in WD40 or a similar easing fluid. To find the correct hole, loosely screw the studs in and position the seat in place and ensure all points above are met. Depending on the type of seat or seat fixings you’re using, tools may not be needed. However it’s a good idea to have a basic set to hand: There are quite a few different shapes of toilet around today and many different types of toilet seat to match. Once the nuts holding the seat in place are removed you can simply lift it away and free from the pan.