Your doors are prone to fade and weather with time owing to their exposure to sunlight and other weather conditions, just like any other exterior feature of your property. These corrosive elements might cause a door to appear worn out over time. To use Polytrol you simply rub it into the surface with a clean, dry cloth and leave it to work for 10-20 minutes before wiping off any excess with a lint-free cloth. Job done! Using a brush or lint-free cloth, apply an even, generous coat of Polytrol. Leave it work for 10-20 mins and then wipe off the excess Polytrol with a new, clean lint-free cloth and leave to dry. Clean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding. Things to Remember After cleaning, leave the door to dry for 24 hours before applying Polytrol. Make sure that your door is completely dry before moving on to the next step! 2. Apply the Polytrol

Phil needed some help restoring his GRP garage door. He wasn’t sure which product to use so he got in touch and asked! We recommended Polytrol as it revives and restores the colour of faded surfaces – it’s grea for fibreglass so perfect for Phil’s garage.Buy your door from EYG and you don’t have to worry about a thing – thanks to our ten-year ‘repair or replace’ warranty promise.

After you have applied Dilunett, your best option is to then finish the doors with a paint, such as Owatrol Deco – our rust inhibiting primer and paint available in 13 colours. Anoth customer achieved impressive results on their moped with Polytrol. They just wiped it on with a lint-free cloth, left it to work and then wiped off the excess. The Polytrol brings out the pigment from within the surface and leaves it looking good as new! I think you're right, JeepersCreepers, prep is everything - it took longer than painting! I also recommend a decent brush. I also think you're right in that it may be one of those regular jobs - oh well! Hopefully it'll do me for a few years.Clean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours. Application of Polytrol Colour Restorer General directions

Want an updated design, as well as a new colour? Get in touch with our friendly team for a no-obligation free quote and advice. We're always happy to chat windows and doors! When doors are closed correctly, there is a chance that the centre of the door will only be held in place by the latch, allowing the top and bottom parts of the door to swell or warp in the heat. You can save money long-term by throwing the handle every time you shut the door! Martin Lewis: Do you have a Power of Attorney? It’s crucial protection – not just for the elderly – and more important than a will For the final step, you should use beeswax or another similar product to give your newly painted door a protective layer for the materials and a professional finish. Use a brush or a cloth to liberally apply Polytrol. If you notice that some bits are looking shiny and others are looking matt, move any of the surplus oil over to the matt areas. Leave it to work then wipe off the excessIn addition, making sure you shut the door correctly when you enter or leave your home will help to prevent any further problems. Making sure you ‘throw’ the handle to ensure both the top and bottom of the door is hooked in properly can help to prevent problems occurring over the long-term. Apply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry. For more information about Paul and his company please see his bio below. We couldn’t wait to see the photos and share them with our other customers. I’m sure you’ll agree that the transformation is nothing short of marvellous!

The best way to fix this issue is by adjusting the hinges on the door frame. Start by removing all existing screws from the hinges and then inserting new ones that are slightly longer. This will help create a tighter fit for the door and should stop any warping or bowing. You may also need to add additional weather stripping around the edges of the door if there are still gaps present after adjusting the hinges. Dropped hinges: All surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly. Using Polytrol on plastic, gelcoat, tiles, painted surfaces etc. Do not allow excess Polytrol to dry and create a film on the surface (always remove excess product). Almost any type of door can swell or warp, and it's crucial to understand why, because you might already be noticing it in your house and not know how to respond.NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024.